Make your own free website on Tripod.com
I have seen this in alot of sites  and got really excited but then got mad  when  all of them said coming soon so now I'm putting out my own mail in your problems and I'll answer in a full description


    Common Problems

Bars and wheel/fork alignment
tools: wrench

1) make sure the bars and tire are aligned
2) find where the fork and gyro meet (above frame below bars)
3) the front brake cable goes into a bolt lock onto that bolt with the wrench and tighten it

Move your bars forward or back
tools: Y hex wrench

1) on the piston stem (the thing that connects the fork to the bars) loosen the screws to move it tighten to stop moving
 WARNING: IF YOU ARE  JUST MOVING YOUR BARS BECAUSE YOU THINK IT WILL HELP YOU IT MAY END UP MESSING UP YOUR BARS

Take your tire off/new inner tube
tools: ratchet  with extension and bit/knife
*only for people with pegs*
1) make sure the bit fits the bolt in the peg
2) put the tool on the bolt (which is inside the peg) and loosen it to the point where the peg is off repeat for other peg
3) pull the tire back and with the knife cut the tube so the tube is a straight line when laid
4) take out tube and place new tube in
5) reattach pegs



          diagrams and pix
      coming soon